 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
RY_LACEY
Level 1 User
Joined: 15 Dec 2005
Posts: 39
|
| Posted:
Thu Mar 16, 2006 6:29 pm |
|
hello, have been offered some alloys and was wondering if they will fit on my 19?
thanks ryan |
|
|
|
|
david3533
Site Subscriber
Joined: 02 Oct 2004
Posts: 1575
|
| Posted:
Fri Mar 17, 2006 2:21 am |
|
you will need to know the exact spec pcd et etc etc |
|
|
|
|
Doc
Site Subscriber
Joined: 11 Feb 2005
Posts: 2929
|
| Posted:
Fri Mar 17, 2006 2:24 am |
|
or you could just try putting one on your car. |
|
|
|
|
GSB
Newbie
Joined: 16 Mar 2006
Posts: 5
|
| Posted:
Fri Mar 17, 2006 12:46 pm |
|
The Answer it would seem is No...
The Early Ibiza has the wrong PCD, whilst the later ones are a 5 stud wheel. The '93 to '01 model wheels will fit, but only if you have 3mm machined out of the centre bores so that they fit onto your hubs. This will work, but only if the removal of this material has no effect on the strength of the wheel, if its a particularly "open" design, you may want to reconsider.
Renault 19:
Pitch Circle Diameter = 4 x 100mm
Offset = 35 to 45mm
Centre Bore 60.1mm
Seat Ibiza up to 1993:
Pitch Circle Diameter = 4 x 98mm
Offset = 35 to 45mm
Centre Bore = 58.1
Seat Ibiza 1993 to 2001:
Pitch Circle Diameter = 4 x 100mm
Offset = 35 to 45mm
Centre Bore 57.1mm
Seat Ibiza 2001 On:
Pitch Circle Diameter = 5 x 100mm
Offset = 35 to 45mm
Centre Bore 57.1mm |
|
|
|
|
|
|
| |