| Author |
Message |
friart
Level 3 User
Joined: 08 Jun 2006
Posts: 68
|
| Posted:
Sat Aug 05, 2006 12:44 pm |
|
19 16v runs sweet but when she warms up it starts backfireing? so bad you cant even pullaway!
any ideas? |
|
|
|
|
Gentle Ben
Site Subscriber
Joined: 07 Oct 2004
Posts: 2281
|
| Posted:
Sat Aug 05, 2006 12:54 pm |
|
Ignition problem? I'm sure this happens when there is too much advance or retard but I can't remember which one causes it! |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Sat Aug 05, 2006 2:00 pm |
|
checked the plug wells?
Map sensor pipe intact?
Coudl be so many things. |
|
|
|
|
friart
Level 3 User
Joined: 08 Jun 2006
Posts: 68
|
| Posted:
Sun Aug 06, 2006 11:02 am |
|
wierd!
runs ok till it gets warm then its fucked
i left it running for about 30 seconds and it just stalls and white smoke billows out my induction kit! then it wont start.
im seriously pissed off.
i took it to get the gear box changed and there was nothing wrong with it, now ive got it back it does this, ive refused to pay them |
|
|
|
|
friart
Level 3 User
Joined: 08 Jun 2006
Posts: 68
|
| Posted:
Sun Aug 06, 2006 11:17 am |
|
wells are ok , map pipe intact
this is a long shot but the magnex cat is rattling all the time , its internal, and if i boot it it kicks out a lot of shit , iv been told.
could this have anything to do with it? |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Sun Aug 06, 2006 2:12 pm |
|
running rich for sure.
Open the throttle and I'll bet it stinks of fuel.
Check the coolant temp sensor is plugged in or that they haven't trapped the wires between the block and box. |
|
|
|
|
friart
Level 3 User
Joined: 08 Jun 2006
Posts: 68
|
| Posted:
Mon Aug 07, 2006 6:07 am |
|
tried all that
how do i test if the coil pack is working?
theres no spark now, nothing from the leads, nothing from the coil to the distributer, how do i test if there power going to the coil?
had a fort , when they changed the gearbox they didnt change the sensor on the flywheel, so i changed that , but thats not the prob ,
loads of fuel going through just no spark????????? |
|
|
|
|
Doc
Site Subscriber
Joined: 11 Feb 2005
Posts: 2929
|
| Posted:
Mon Aug 07, 2006 6:08 am |
|
this sounds familiers dont it chris. |
|
|
|
|
friart
Level 3 User
Joined: 08 Jun 2006
Posts: 68
|
| Posted:
Mon Aug 07, 2006 7:19 am |
|
just tested the + and - on the wires going to the coil and there is power there, i just want to test the coil now |
|
|
|
|
friart
Level 3 User
Joined: 08 Jun 2006
Posts: 68
|
| Posted:
Mon Aug 07, 2006 7:21 am |
|
| friart";p="103483 wrote: |
just tested the + and - on the wires going to the coil and there is power there, i just want to test the coil now, and the ignition modual
|
|
|
|
|
|
bbracer16valver
Retroholic
Joined: 23 Dec 2005
Posts: 3315
|
| Posted:
Mon Aug 07, 2006 7:40 am |
|
i bet iggy module is at fault |
|
|
|
|
friart
Level 3 User
Joined: 08 Jun 2006
Posts: 68
|
| Posted:
Mon Aug 07, 2006 7:57 am |
|
ill let you know bb cus im taking it up wilco to get it all tested in a bit |
|
|
|
|
friart
Level 3 User
Joined: 08 Jun 2006
Posts: 68
|
| Posted:
Mon Aug 07, 2006 1:09 pm |
|
shes alive !
youl never guess wat the problem was????????? |
|
|
|
|
R1916S
Site Subscriber
Joined: 23 Jan 2005
Posts: 502
|
| Posted:
Tue Aug 08, 2006 12:11 pm |
|
|
|
|
tominbristol
Level 9 User
Joined: 03 Jul 2006
Posts: 412
|
| Posted:
Tue Aug 08, 2006 2:43 pm |
|
no, we're still guessing! Engine in backwards? |
|
|
|
|
|
|
