 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Fri Jan 14, 2005 5:28 am |
|
yes it will do. Theres 3 different loom types onthe 16Vs. Not all have the pressure switch in the pumps outlet so it may not respond as quickly. |
|
|
|
|
Bridges
Level 3 User
Joined: 13 May 2004
Posts: 79
|
| Posted:
Fri Jan 14, 2005 6:02 am |
|
Hmmm. Is it the pumps load or a valve that initially drops the engine rpm then? Am thinking that if its the pumps load then the belt must be too loose and possibly worth a check on the tensioner. Oh and yes as a result of the wd40 the belt is forced to ever so slightly slip on full lock. However tension seems ok and am basing this on the fact that the cars eaten 1 drive belt before (not fitted by me)  |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Fri Jan 14, 2005 7:07 am |
|
pumps load. The switch raises the idle up to try and prevent it dropping. |
|
|
|
|
|
|
| |