Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Clio 16v strange noises
Author Message
mixpioneer
Site Subscriber

Joined: 29 Dec 2004
Posts: 395

Posted: Wed Dec 29, 2004 8:49 am

Hi
Over the past few months i have noticed my clio 16v starting to make some strange noises. Unfortunately i havnt had the chance or the money to take it to a garage so ithought i'd see if any of you lot here could shine some light on the matter.

1 - Knocking coming from the front passengers side arch. Sometimes when i turn corners or go over bumps. It also makes these knocking sounds when i jack up the car off the ground, and again when i lower it back down. I thought it could be the ball joint but not sure.

2 - Hissing noise coming from below the inlet manifold between the main block and the manifold. I checked the hoses and they are all in tact. The hissing continues for a few seconds when the engine stops but then fades out.

3 - From roughly the same place as the hissing is a high pitch ticking (sounds like an electrical ticking) this increses with the engine revs.

I had a thought that the hissing and ticking could be something to do with one of the injectors........perhaps??????

Any info on the matter would be greatfully recieved before i make the dreaded trip to the garage and pay for their next holiday to the Bahamas.

Cheers!!
A14LN C
Site Subscriber

Joined: 15 Oct 2004
Posts: 1139

Posted: Wed Dec 29, 2004 9:03 am

1# could b ball joint, but it sounds like the strut top bolts or even the rubbers at the top, but then again i dont know if clios hav got rubbers at the top of the strut?????? Confused

one for chris h as usual!
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Dec 29, 2004 9:08 am

1. Top mount like Alan said.

2. how do you know where its coming from? Can you see in there? How small are you? Would you fit in my hand? With it running spray wd-40 up from under the manifold and see if the noise changes or the revs change. If so then the inlet manifold gaskets blown (never seen a blown one yet) or it may just be the noise from the ISCV or breather pipe.

3. The injectors tick very loudly on these engines. They are up the top so they can't be the source of the noise if your so sure its from underneath. But spray wd-40 on them as well and note if it changes.
Roger Red Hat
Site Subscriber

Joined: 13 Oct 2004
Posts: 4722

Posted: Wed Dec 29, 2004 9:22 am

possible valve clearnace needs doing..

for the ticking..

but never heard them high pitched before?

:-/
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Dec 29, 2004 10:20 am

roger retract that last statement or we shall mock you, lots.
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Wed Dec 29, 2004 10:23 am

too late....

hahahaha Very Happy
mixpioneer
Site Subscriber

Joined: 29 Dec 2004
Posts: 395

Posted: Wed Dec 29, 2004 11:03 am

Cheers for the help!

Havnt got round to the WD40 tests yet, but just had a closer inspection of my suspension and there seems to be a lot of oil over my spring and top of the strut. These shocks are oil dampened i take it?
A14LN C
Site Subscriber

Joined: 15 Oct 2004
Posts: 1139

Posted: Wed Dec 29, 2004 12:08 pm

could b the srtut top bearings hav went if so its recomended u change the rubbers aswell as the bearing!
Roger Red Hat
Site Subscriber

Joined: 13 Oct 2004
Posts: 4722

Posted: Wed Dec 29, 2004 1:04 pm

what?

tapping noise that increases with revs?

?!?
the_chunkster
Level 2 User

Joined: 02 Aug 2004
Posts: 54

Posted: Wed Dec 29, 2004 1:11 pm

valvers don't have tappets there hydolic
Roger Red Hat
Site Subscriber

Joined: 13 Oct 2004
Posts: 4722

Posted: Wed Dec 29, 2004 1:20 pm

well well well...learn summin ever day dont ya..

i really shud get to work on one of thses engines..

Razz
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Dec 30, 2004 6:09 am

All shockers are oil damped. Gas shockers also have oil in them but its sealed within a gas cylinder, this is what allows them to be used horizontally or inverted, theres a useless bit of info for you.

But if the shockers are leaking oil then they be buggered my man. They will not pass an mot liek that and the handling will be crap as well.

So new dampers and top mounts, use your existing springs and all probs with the front suspension will be sorted.
mixpioneer
Site Subscriber

Joined: 29 Dec 2004
Posts: 395

Posted: Thu Dec 30, 2004 3:21 pm

Cheers mate, i thought it didnt look good when i saw it Confused

Take it its best to replace both front shocks at the same time to get a matched ride either side?
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Dec 31, 2004 3:22 am

yeah replace them both to keep it matched, much better, do the rears as well, will be all new all round then. Magic.
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours
ScriptWiz.com phpbb HTML Archiver - Created by ScriptWiz.com and released by Skinz.org