| Author |
Message |
sambort
Level 3 User
Joined: 27 Jun 2006
Posts: 67
|
| Posted:
Fri Jul 14, 2006 5:21 am |
|
ok looking at getting a full system for my mk1 RT, do the 16v full systems fit as i have head they can off some people and cant off others?
thanks alot, sam! |
|
|
|
|
david3533
Site Subscriber
Joined: 02 Oct 2004
Posts: 1575
|
| Posted:
Fri Jul 14, 2006 6:34 am |
|
don't see why not from the cat back it should its the same car |
|
|
|
|
sambort
Level 3 User
Joined: 27 Jun 2006
Posts: 67
|
| Posted:
Fri Jul 14, 2006 8:14 am |
|
hmmm, so would a full system... inc de cat be ok? |
|
|
|
|
munch
Level 5 User
Joined: 04 Jul 2006
Posts: 113
|
| Posted:
Fri Jul 14, 2006 11:07 am |
|
Shouldnt see any problems with fitting the 16v zorst, but i will have a look around and see what i can find out for you. The only difference will be the pipe diameter i should imagine, if that is the only difference just get something called a magic pipe (reducer pipe) then it should all fit nicely. Also phase 1 and phase 2 zorsts are the same.
Steve |
|
|
|
|
sambort
Level 3 User
Joined: 27 Jun 2006
Posts: 67
|
| Posted:
Fri Jul 14, 2006 2:42 pm |
|
sweet mate, where abouts could i pick up one of these magic pipes from??
thanks alot for the help! |
|
|
|
|
munch
Level 5 User
Joined: 04 Jul 2006
Posts: 113
|
| Posted:
Sat Jul 15, 2006 1:44 am |
|
Halfords sell them and you could try place's like Kwik fit. Or any other good exhaust place should be able to help you out. |
|
|
|
|
sambort
Level 3 User
Joined: 27 Jun 2006
Posts: 67
|
| Posted:
Sat Jul 15, 2006 1:59 am |
|
exellent, so does it bassically flare/taper bigger towards one end to cater for the bigger bore?? |
|
|
|
|
donsrno1
Level 10 User
Joined: 04 Nov 2005
Posts: 575
|
| Posted:
Sat Jul 15, 2006 2:08 am |
|
tbh if you were to get a decat and cat back system then it should fit OK without the need for a reducer pipe of any kind as the decat for the 16v and 1.4 are identical (at least when I bought mine they were down as being the same). |
|
|
|
|
sambort
Level 3 User
Joined: 27 Jun 2006
Posts: 67
|
| Posted:
Sat Jul 15, 2006 2:20 am |
|
ahhh, i suppose i can get one to try. whats the deal with the bends in the pipes underneath, are they the same so they can have a snug fit?
are mongoose exhausts good?
cheers for the help people. |
|
|
|
|
munch
Level 5 User
Joined: 04 Jul 2006
Posts: 113
|
| Posted:
Sat Jul 15, 2006 10:59 am |
|
Mongoose done great zorsts years ago when i had one on my old 5 turbo, cant see why anything would have changed. Also Janspeed and Ashley zorsts are quality just depends on what you can afford really. Im almost certain they have the same bends etc underneath but i will try and check out some diagrams properly for you. |
|
|
|
|
sambort
Level 3 User
Joined: 27 Jun 2006
Posts: 67
|
| Posted:
Sat Jul 15, 2006 11:01 am |
|
cheers mate, appreciate all this help  |
|
|
|
|
sambort
Level 3 User
Joined: 27 Jun 2006
Posts: 67
|
| Posted:
Sun Jul 16, 2006 2:44 am |
|
anyone know the stabdard bore size of a clio mk1 rt exhaust, and a 16v/williams?
cheers!!! |
|
|
|
|
donsrno1
Level 10 User
Joined: 04 Nov 2005
Posts: 575
|
| Posted:
Sun Jul 16, 2006 3:27 am |
|
The bends etc are exactly the same. The bore is quite a bit more on the 16v but I'm not sure of the exact sizes. |
|
|
|
|
sambort
Level 3 User
Joined: 27 Jun 2006
Posts: 67
|
| Posted:
Sun Jul 16, 2006 8:38 am |
|
schweeeet, looks like i shall be purchasing a nice zaust this week then! ... hmm... a reducer pipe! |
|
|
|
|
|
|
