Clutch pedal assembly

Site Subscriber Joined: 07 Oct 2004 Posts: 2281

How does it go back on, fully assembled inc. spring? Or do you connect up the spring when it's in only that looks nigh on impossible.

Someone help I've been at it for about 2hrs straight and I've about had it trying to figure out how to get it in line with the pivot shaft.

Something smashable is going to feel my wrath unless it gets sorted out soon.

Forum Moderator Joined: 18 Feb 2004 Posts: 7432

2 hours?

What's the timescale for this V6 conversion again? Razz

FCS Event Manager Joined: 04 Jan 2005 Posts: 3680

Pedal fully assembled but not with the spring, attach the clutch cable then attach the spring.

thats how i did it on my 19 and took me about 15 minutes in total

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

its impossibel to attach the sprign after i find, my hands are to pig, assembelt he whole lot hold it together ansd slife it on.

Site Subscriber Joined: 07 Oct 2004 Posts: 2281

It's on, but not in the timescale or fashion anticipated.

What was frustrating was that we couldn't seem to get the pedal anywhere near the right position.

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

its fiddly as feck and on yours the imnmob wire passign through the frame doesn't help.

Site Subscriber Joined: 07 Oct 2004 Posts: 2281

Aye you aint wrong, I've never heard me Dad curse so much in his life!

Louis would be turning in his grave if he could hear some of the Renault-themed expletives he was churning out!

Site Subscriber Joined: 01 Feb 2005 Posts: 728

I put the whole lot on minus the spring then get some thin cable (speaker/bell wire) and loop it round the bottom hook of the spring, pull it down to hook on the pedal then pull out the cable.