 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
huwwatkins
Site Subscriber
Joined: 10 Jun 2004
Posts: 2317
|
| Posted:
Sun Mar 06, 2005 7:24 am |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Sun Mar 06, 2005 7:28 am |
|
yes but you need the 1.8/williams one.
The muppet sellign then doesn't seem to know the 1.8 and williams are totally different from the megane thus the inlets won't go. |
|
|
|
|
Neal
Forum Moderator
Joined: 18 Feb 2004
Posts: 7432
|
| Posted:
Sun Mar 06, 2005 7:29 am |
|
is the head gasket the same though? Ive wondered about this, since the chamber in the head is the same on the 1.8 and 2.0, but the bore is bigger on the 2.0.
Does the head gasket match the bore or the chamber? |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Sun Mar 06, 2005 7:31 am |
|
bores the same, well ok less than 1mm difference. Its the stroke that makes the extra capacity.
So yes the head gaskets are the same. |
|
|
|
|
huwwatkins
Site Subscriber
Joined: 10 Jun 2004
Posts: 2317
|
| Posted:
Sun Mar 06, 2005 7:47 am |
|
Right, so basically the 'RENAULT CLIO WILLIAMS 2.0 16V HEAD GASKET SET' one is a no no? Shame, cos currently its a fair bit cheaper  |
|
|
|
|
Neal
Forum Moderator
Joined: 18 Feb 2004
Posts: 7432
|
| Posted:
Sun Mar 06, 2005 7:51 am |
|
I think you'll be alright with the williams one, the point chris was making is that the 2.0 auction says it will fit the megane as well, which is wrong |
|
|
|
|
huwwatkins
Site Subscriber
Joined: 10 Jun 2004
Posts: 2317
|
| Posted:
Sun Mar 06, 2005 8:49 am |
|
Oh bollocks, went outside to finish trying to remove the head and forgot about the auction |
|
|
|
|
Neal
Forum Moderator
Joined: 18 Feb 2004
Posts: 7432
|
| Posted:
Sun Mar 06, 2005 9:25 am |
|
hah fool!  no matter, theyre always on there. |
|
|
|
|
|
|
| |