Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Engine temp gauge uber slow and PAS noisy as fook.
Author Message
FincH
Site Subscriber

Joined: 05 Jan 2005
Posts: 569

Posted: Tue Dec 27, 2005 11:23 am

Hi.

On my Clio 16v the engine water temp display is extremly slow at moving. It takes about 10 minutes for it to actualy sit on the bottom bar (the one above the very very bottom one and I've only ever seen it at the normal running temp bar once.

Also my heaters seem to be cold, although when I boot it they go warm for a bit then cold, but will slowly heat up.

I'm thinking it could be the Thermostat, does that sound right?.

Also my PAS pump is very noisy. The resvouir has fluid in but it's not near the top although I don't know where the top is so to speak (MAX mark...where?)

When turning etc etc it makes a howling sort of sound, very annoying.

Also when deaccelerating and the engine revs get to 2500 the whole car starts to shake and there's a loud, very deep sound from under the car...wtf?

Any ideas? Cheers.
Gentle Ben
Site Subscriber

Joined: 07 Oct 2004
Posts: 2281

Posted: Tue Dec 27, 2005 11:36 am

My PAS pump is very noisy as well.

Heaters will get hotter when booting it because obviously the engine's getting hotter! Change the thermostat anyway, cost about a fiver which is nothing really for some peace of mind.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Dec 28, 2005 12:58 am

the thermostat will be missing.

The max mark is on the side of the bottle if you look, get someone to turn the steering wheel while you watch the belt and watch the fluid level.

If air comes out through the oil it needs cbleed, if you see the belt jumping then you need a new alt belt/to tension it right.

New fluid may sort it but then again may not so check the other things forst.
Benskett
Level 10 User

Joined: 05 Mar 2005
Posts: 570

Posted: Wed Dec 28, 2005 2:00 am

FincH wrote:
Hi.

On my Clio 16v the engine water temp display is extremly slow at moving. It takes about 10 minutes for it to actualy sit on the bottom bar (the one above the very very bottom one and I've only ever seen it at the normal running temp bar once.

Also my heaters seem to be cold, although when I boot it they go warm for a bit then cold, but will slowly heat up.

I'm thinking it could be the Thermostat, does that sound right?.

Also my PAS pump is very noisy. The resvouir has fluid in but it's not near the top although I don't know where the top is so to speak (MAX mark...where?)

When turning etc etc it makes a howling sort of sound, very annoying.

Also when deaccelerating and the engine revs get to 2500 the whole car starts to shake and there's a loud, very deep sound from under the car...wtf?

Any ideas? Cheers.


Laughing Laughing Told you, 1.4 all the way Cool
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours
ScriptWiz.com phpbb HTML Archiver - Created by ScriptWiz.com and released by Skinz.org