 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.�
|
| Author |
Message |
srr
Level 8 User
Joined: 02 Dec 2004
Posts: 263
|
| Posted:
Sat Mar 19, 2005 5:11 am |
|
Hi guys,
The weathergods have finally given me a non freezing condition outside
this weekend. Last two-three weeks have been jumping from -2c° to -13c° 
Anyways, im gonna try to exchange the wings on my cars today. And if i got the time im gonna try with the bumpers. 
Anything i need to know before removing and mounting the wings?
How many bolts are there and where are they ? 
Is there any difference between the 1.4e and 1.8 regarding this matter?
Any help is well taken  |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Sat Mar 19, 2005 1:25 pm |
|
1 bolt at the bottom, 2 nuts inside at the back of the wing behind the arch liner, 1 at the front behind the bumper and however many on the top of it. |
|
|
|
|
srr
Level 8 User
Joined: 02 Dec 2004
Posts: 263
|
| Posted:
Sun Mar 20, 2005 3:43 am |
|
It ended like this:
2 10mm bolts at the bottom (one to the chassis and the other to the sideskirt
2 10mm nuts inside the wing behind the arch liner
1 10mm bolt at the front beind the bumper
4 10mm bolts at the top (visible with the hood open)
2 13mm bolts which hold the hood in place on the current side needed loosening up
And first i had to get the arch liner out, which is one torx screw on each side of the liner at the bottom. And 4-6 plastic push-in clips (they're shitty!!!)
So now i have a dent free car 
Also changed the nose panel/grille  |
|
|
|
|
|
|
| |