 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
g1macuk
Level 3 User
Joined: 11 Oct 2005
Posts: 61
|
| Posted:
Thu Nov 03, 2005 8:55 am |
|
my mate says i can have his hub and carrier off his r19 but as im not good with cars how can i get it off with out mucking up the bearings pic and help please cheers |
|
|
|
|
Lunner
Level 6 User
Joined: 18 May 2005
Posts: 162
|
| Posted:
Sat Nov 05, 2005 10:28 am |
|
Not very halpful but get a HAynes manual, will give you step by step guide wiht pics.
In a nutshell:
Remove stearing arm via ball joint
remove one of the nuts to the shock
remove hub nut and driveshaft
remove other bolt to shock and fully remove dfriveshaft
remove hub from lower ball joint |
|
|
|
|
touring_19_16v
Level 10 User
Joined: 27 Apr 2005
Posts: 620
|
| Posted:
Sat Nov 05, 2005 10:38 am |
|
do what im going to do undo the the lower arm bolts the track rod end bolt and the 2 strut bolts and the 3 13mm bolts on the drive shaft side and remove and replace the whole lot take you half the time and u dont need to grease anything up just bolt all back together refill box get your disc on and bada bing sorted |
|
|
|
|
huwwatkins
Site Subscriber
Joined: 10 Jun 2004
Posts: 2317
|
| Posted:
Sat Nov 05, 2005 11:12 am |
|
You'd have to work pretty hard to much up the wheel bearing in the hub just by removing it from the car. |
|
|
|
|
|
|
| |