 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
speed
Level 1 User
Joined: 01 Jan 2006
Posts: 21
|
| Posted:
Mon Jun 05, 2006 12:32 pm |
|
hi ppl
i have a slight idle problem ani i hope you guys could help
when ive bien on a drive the revs at idle seem to stick at 2k
i kinda know what the prob is but dont know what to do bout it, ill explain the best i can
were the accel cable joins the TB (black pully), it dont seam to snap shut to the stoppa screw leaving the butterfly on the TB slightly open? some times it does most times it dont, i oiled the spring, still no joy, theres plenty of slack on the cable so its not that,
any ideas? whats that black circle thing at the other side of the TB? it has a plug goin in to it, could that be my prob?
any help apriciated
its a meg 2.0 16v ph1 btw |
|
|
|
|
Gentle Ben
Site Subscriber
Joined: 07 Oct 2004
Posts: 2281
|
| Posted:
Mon Jun 05, 2006 2:29 pm |
|
Clean up the Throttle Body and ISCV with carb cleaner.
If you look in the Knowledge Base you'll find articles Chris has done on how to do it. |
|
|
|
|
Neal
Forum Moderator
Joined: 18 Feb 2004
Posts: 7432
|
| Posted:
Mon Jun 05, 2006 2:35 pm |
|
Don't fanny about with that 'black circle thing', it's the TPS. |
|
|
|
|
speed
Level 1 User
Joined: 01 Jan 2006
Posts: 21
|
| Posted:
Tue Jun 06, 2006 11:29 am |
|
the TB and ICV are clean. just had another look and it seems the butterfly on the TB is ever so slightly scraping the botton of the TB holding it open. i sprayed a little carb cleaner on as lube and it worked fine. is there any way the butterfly can be adjusted |
|
|
|
|
|
|
| |