 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
william
Site Subscriber
Joined: 25 Nov 2004
Posts: 350
|
| Posted:
Wed Mar 30, 2005 11:12 am |
|
Few questions:
1. The motor that adjusts the light beam up and down (on RHS of steering column), does it move the whole head light assembly, or just the bulb?
2. Would a spot-lamp be an acceptable means of a headlamp (with the correct bulb obviously (i.e. full beam and low beam-halogen?))?
cheers |
|
|
|
|
Chet T16
Retroholic
Joined: 12 Feb 2004
Posts: 5685
|
| Posted:
Wed Mar 30, 2005 11:14 am |
|
1. the inside of the headlight moves with the bulb in
2. No, wrong beam pattern, too low to be legal and countless other reasons |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Wed Mar 30, 2005 11:16 am |
|
1. It move the backing that the bulb sits in.
2. no unless you remove the existing headlights and weld in suitable brackets, like a mini wing or mini headlamp bowl repair panel |
|
|
|
|
william
Site Subscriber
Joined: 25 Nov 2004
Posts: 350
|
| Posted:
Wed Mar 30, 2005 11:23 am |
|
1. ok cheers
2. fitting brakcets (or making it fit in other words) isn't really a problem. i was a tad concerned about the beam pattern though. Spot-lamp reflective backing shouldnt be that dis-similar to that of say a Mini headlamp, or a Land Rover headlamp though? |
|
|
|
|
|
|
| |