 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
Addie
Site Subscriber
Joined: 05 Apr 2004
Posts: 1141
|
| Posted:
Thu Jul 21, 2005 6:15 pm |
|
The windscreen on Liams valver is loose in the bottom left passenger corner, from the inside you can actually push the windscreen about one inch out!
Duct tape to the rescue!
Whats the cause or cure? |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Fri Jul 22, 2005 12:05 am |
|
same story with my chamdes screen, both sides of it were loose and you could push it an inch out.
I got a new screen fitted.
It really needs removed, cleaned and re-sealed to do a proper job.
You can lift it out clean it with solvent cut back the mastic on the body side then use sealant on it. Gte windscreen sealant not to dear and goes in a normal gun. |
|
|
|
|
Ian P
Level 2 User
Joined: 19 Jul 2005
Posts: 40
|
| Posted:
Fri Jul 22, 2005 12:16 am |
|
If you cant get windscreen sealer which is the best to use ive used fish tank repair sealant before, very strong and very water tight, cheap too |
|
|
|
|
|
|
| |