 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
lee16vclio
Newbie
Joined: 11 Aug 2005
Posts: 9
|
| Posted:
Thu Aug 11, 2005 10:49 am |
|
 hi all....well where do i start,,,,driving my clio 16v phaze1 on tuesday and gave it a little boot down the round...then the engine started 2 die out.as soon as i tryed to rev the car it just died out..seemed to have no responce on throtle..(it was a little low on petrol)....so i managed to fill it up,,,,but still no joy in starting her...i checked the fuel pump.this seems to not be coming onwhen i turn the ignition for some unknown reason..i put a piece of cable on it to the battery and it works..there is a immobizer in the glove box,with a key thob..which i dont no if these are standard.,,,i took this out and noticed a cable running from it to the relay box in the engine bay.,which just happened to be the fuel pump relay(oh my days))...i just need a bit of info on this problem if any of you no..HELP WOULD BE WELL APREIATED.....REGARDS LEE  |
|
|
|
|
huwwatkins
Site Subscriber
Joined: 10 Jun 2004
Posts: 2317
|
| Posted:
Thu Aug 11, 2005 11:31 am |
|
The wires that go to the key in the glove box, disconnect them and bridge them. Liam had this problem on his blue chammy |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Thu Aug 11, 2005 1:41 pm |
|
common prob due to crappy installation, I done an article in the knowledge base about it. |
|
|
|
|
lee16vclio
Newbie
Joined: 11 Aug 2005
Posts: 9
|
| Posted:
Fri Aug 12, 2005 7:52 am |
|
hi thanx for the replys chaps...ill give that a go(bridgin them)do i have to get rid of the key thing altogether though.... |
|
|
|
|
lee16vclio
Newbie
Joined: 11 Aug 2005
Posts: 9
|
| Posted:
Fri Aug 12, 2005 8:00 am |
|
also ...thanx chris h,just read your article on the immobizer...ill have a proper check over it 1st i think |
|
|
|
|
|
|
| |