Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 normal post
Author Message
rizla
Level 2 User

Joined: 04 Jun 2005
Posts: 48

Posted: Thu Aug 18, 2005 11:30 am

when i pull onh/brake and brake withfootpedal i get a squeky sound any thoughts thanks?
Doc
Site Subscriber

Joined: 11 Feb 2005
Posts: 2929

Posted: Thu Aug 18, 2005 12:45 pm

Have a look at your rear brakes, they may need a clean, remember to use copper grease as on the back of the pads and on the runners as it stops this squeaking happening.
It could also indicate that your rear brake pads or shoes (depending on your car)could be worn, if so get new ones fitted.

See When you ask sensible questions you get sensible answers.

More of these posts Rizla, lets forget about the other stuff eh?
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Aug 19, 2005 12:00 am

the rear shoes pivot will be dry, the brakes press on the shoe but the handbrake pulls on a lever on the shoe so you get a squeak.
rizla
Level 2 User

Joined: 04 Jun 2005
Posts: 48

Posted: Fri Aug 19, 2005 10:32 am

is thier a plastic removable insp piece on rear drum not looked as yet
what if i spray wd40 into drum itll burn off excess as drums are a real pain to get off also its beenfitted with new rear shoes only recently it also makes this noise when braking also it feels as though its braking in step formation from pedel feel i get a lot of rusty looking dust on front alloys me thinks new discs and pads required soon is their an easy way to undo the disk retaining torxs thanks for your reply not a racist comment in sight up the haggis
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Aug 19, 2005 10:53 am

no to the wd40.

the drums normally coem off fine, get the drum off clean it out and copper grease the pivot.

front torx screws, put the bit in then belt it with a hammer then it should undo nicely. get someone to press the brake though.
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours
ScriptWiz.com phpbb HTML Archiver - Created by ScriptWiz.com and released by Skinz.org