Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 plumbing problem
Author Message
andy-16v
Level 5 User

Joined: 06 Oct 2004
Posts: 119

Posted: Thu Nov 25, 2004 11:52 am

hi chaps, just a quicky, i've got an under sink waterheater and it feeds 2 vented taps......problem is that when i turn on 1 tap the other 1 pisses water 2, even though the tap is turned off....any imput please as i wanna go home and im stuck in london
Cheers
Andy
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Nov 25, 2004 12:19 pm

so both taps put out water when you turn either one on?

Where is it? upstairs/downstairs/ caravan etc?
andy-16v
Level 5 User

Joined: 06 Oct 2004
Posts: 119

Posted: Thu Nov 25, 2004 12:57 pm

Hi chris, its a heat sadia stream-line 7, 3kw 7 ltr under sink heater.
mains cold inlet -and 2 vented taps.
Have installed pressure regulater on mains side [7psi] and installed 2x vented taps on the hot water side but u turn 1 on and the other comes on to.................im probably staring at the problem but 2 tied to see it Confused
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Nov 25, 2004 1:22 pm

vented taps are cack, we have established this now.

Check the plumbing again and make sure thers not a bypass valve to allow both to feed off 1.

Vented taps the bane of workshops and caravans etc the world over.
andy-16v
Level 5 User

Joined: 06 Oct 2004
Posts: 119

Posted: Thu Nov 25, 2004 2:22 pm

hi matey,back home now,left them with hotwater and 2 responsive taps ha ha,tomorow it will be somone elses problem.b back on after i've eaten got some catching up to do havent had time to scratch my a*** just of late letalone use the pc...................
cheers
A14LN C
Site Subscriber

Joined: 15 Oct 2004
Posts: 1139

Posted: Thu Nov 25, 2004 2:24 pm

Fuk me, Chris is a plumber.....lol (aswell) lol
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Nov 26, 2004 3:39 am

DIY is another of my talents.

Done a lot to my mums house, moved radiators, fitted new ones, wiring, leccy shower etc etc, nearly lost an eye grinding a channel in the floor to move the radiator from one wall to another.

had to sort out the bathroom drains again.

I had to raise the pipes from the sink to allow a run off down wards but but the baths low so the u bends very shallow and for some reason after about a year the bath now spits back up when you drain a full sink.

I have removed all the pipes etc cleaned em out even took the plate off the guttering downpipe and cleared the crap there but I still have the problem.

its not helped that the drain from the bath to the waste pipe is near horizontal but aside from raising the bath ior removing the guttering then making nice new holes in the wall I dunno what to do.

Any ideas would be welcome.
andy-16v
Level 5 User

Joined: 06 Oct 2004
Posts: 119

Posted: Sun Nov 28, 2004 9:52 am

Sussed the problem............its a bloody single point heater instead of multipoint.........what a knumbnut Confused
tell u last time i do vented system'''s Twisted Evil Evil or Very Mad
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours
ScriptWiz.com phpbb HTML Archiver - Created by ScriptWiz.com and released by Skinz.org