Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Pulling/drifting to the left!
Author Message
philgally
Newbie

Joined: 12 Feb 2005
Posts: 14

Posted: Thu Feb 24, 2005 11:23 am

Hi
ever since I've had my clio 16V it has pulled to the left (when I let go of the wheel). I have had the tracking reset, then I changed both the track rod ends, and today I have had two new front tyres put on and the tracking set with the new trackrod ends on...... and it still puls to the left.
Can anyone suggest what is most likely to be the problem, suspension bushes? or even shocks? what can I replace next that will cure the problem?
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Thu Feb 24, 2005 11:27 am

Check the suspension top mounts, springs, anti roll bar bushes, wishbone bushes.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Feb 24, 2005 11:27 am

tracking is the problem. Unless the cars bent.

Laser alignment is the only alignment to get done. Also get set back angles etc as well.
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Thu Feb 24, 2005 2:05 pm

i had the same problem with a fiat that had a massive accident and been repaired . even though they pulled the chasis back in the factory ,the car never been the same .
finland 19
Level 3 User

Joined: 04 Feb 2005
Posts: 66

Posted: Fri Feb 25, 2005 3:34 am

I had the four wheel laser alignment done on my audi coupe which was pulling left.

Sorted it right out! Its quite expensive ( 80 quid? audi main dealer ) but I think it was worth it.
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Sat Feb 26, 2005 5:32 am

got mine done in malborough of all places for about 40quid...inc balancing.
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Sat Feb 26, 2005 5:33 am

and they still managed to get the steering wheel off centre, even tho they clamped it in the straight position!!
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours
ScriptWiz.com phpbb HTML Archiver - Created by ScriptWiz.com and released by Skinz.org