 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
astrojon007
Site Subscriber
Joined: 29 Mar 2005
Posts: 731
|
| Posted:
Sat Apr 02, 2005 8:22 am |
|
Got all the parts for the exhaust now. Apart from the nuts/bolts. What size do they need to be for the mani-downpipe and downpipe-cat. Need to get the bits before doing the job and can't find out till I start. Cheers .J |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Sat Apr 02, 2005 8:30 am |
|
I just went to B&Q and got them.
About 50mm long with 13mm head, dunno the exact size etc as I know them when I see them.
Front might be a problem as the bolts go into a captive thread on the CAT itself. I had to drill em out after I used the grinder on the bolt heads. |
|
|
|
|
astrojon007
Site Subscriber
Joined: 29 Mar 2005
Posts: 731
|
| Posted:
Sat Apr 02, 2005 8:33 am |
|
Would be a problem but I've got a downpipe, Cat-replacement(straight through and a new rear section. This way I don't have to worry about old bits fitting on to new properly apart from mani-downpipe which shouldn't be a problem at all.
You're a very handy man for all the techy stuff you know. Very glad I found this site.  |
|
|
|
|
JB
Mr Quoter-vator
Joined: 16 Feb 2004
Posts: 7405
|
| Posted:
Tue Apr 05, 2005 1:55 am |
|
m10 is the thread in the manifold flange btw |
|
|
|
|
|
|
| |