| Author |
Message |
bison
Level 1 User
Joined: 20 Sep 2005
Posts: 27
|
| Posted:
Wed Feb 08, 2006 4:01 pm |
|
before i attempt to change the starter motor on my 19 phase 1 16v is there any major issues anybody has experienced while replacing it. |
|
|
|
|
touring_19_16v
Level 10 User
Joined: 27 Apr 2005
Posts: 620
|
| Posted:
Thu Feb 09, 2006 1:17 am |
|
yer i found its a sodding french car and its a b***h to get out, theres a thread chris h has done in the pics/vids bit of this forum labeled starter crap may help. I had difficulty getting it out because the stabiliser bar was in the way and stopping it comin out as long as you remove that bar ot should in theroy drop out |
|
|
|
|
bison
Level 1 User
Joined: 20 Sep 2005
Posts: 27
|
| Posted:
Thu Feb 09, 2006 2:20 pm |
|
thanks,will check it out,got a chammy off ebay last week will try and remove it off that before i touch mine. |
|
|
|
|
Wicked Neo
FCS Event Manager
Joined: 04 Jan 2005
Posts: 3680
|
| Posted:
Thu Feb 09, 2006 3:18 pm |
|
It can be a pain in the ass to get out, took me 25 minutes to remove one from my old valver for Mals's cabby last tuesday.
DC battery
Remove Starter Heatsheild (2 bolts)
Remove cables
undo the 3 bolts that hold the starter to the gearbox
from under the car
there is 2 brackets to remove
first one has 2 bolts and is the bracket that bolts onto the side of the block and the exhaust manifold
second bracket has a bolt that holds it onto the back of the starter motor and 2 that hold it onto the engine.
2nd bracket is the 'y' shaped one
now the starter should be free and u just pop it out |
|
|
|
|
jakey_b
Level 6 User
Joined: 31 Aug 2005
Posts: 141
|
| Posted:
Fri Feb 10, 2006 2:17 am |
|
I have a starter motor from a Clio 16v, would that fit onto my ph2 19? |
|
|
|
|
jakey_b
Level 6 User
Joined: 31 Aug 2005
Posts: 141
|
| Posted:
Fri Feb 10, 2006 2:18 am |
|
I have to turn the key about 30 times before it actually starts to kick at the mo |
|
|
|
|
mals
Self Proclaimed Comic Genius
Joined: 04 Jul 2004
Posts: 3482
|
| Posted:
Fri Feb 10, 2006 4:12 am |
|
Yeah cheers for the startere Neo, I havent got round tofitting it yet, must have caught a cold on the way home from yours the other day!  |
|
|
|
|
Wicked Neo
FCS Event Manager
Joined: 04 Jan 2005
Posts: 3680
|
| Posted:
Fri Feb 10, 2006 10:32 am |
|
| jakey_b";p="81937 wrote: |
I have a starter motor from a Clio 16v, would that fit onto my ph2 19?
|
yep, should fit no problem after all the clio 16v and the 19 16v do have the same engine 
lol Mals, i so wish i had bothered getting my camera down to take pics of u turning up to mine on that battered old scooter lol |
|
|
|
|
|
|
