| Author |
Message |
Rosso
Level 7 User
Joined: 22 Jan 2006
Posts: 182
|
| Posted:
Thu Mar 30, 2006 1:04 pm |
|
When i changed the inlets etc i moved this onto the new ones, ive just read another post in the forum by Neal stating dont move it as it needs setting up with a multimeter! i thought id set it right by adjusting it so it was just touching with the lever which moves it. It might be the causer of a bit of hesitation now and again when the throttle is partially open. How do i set this up properly? I own a multimeter!
Thansk in advance.  |
|
|
|
|
Chet T16
Retroholic
Joined: 12 Feb 2004
Posts: 5685
|
| Posted:
Thu Mar 30, 2006 1:49 pm |
|
You will need someone with a multimeter and working 19 to get the voltage reading s at idle etc for you |
|
|
|
|
Rosso
Level 7 User
Joined: 22 Jan 2006
Posts: 182
|
| Posted:
Thu Mar 30, 2006 2:00 pm |
|
Anyone have a working valver and a multimeter? Or know the settings?
Cheers chet... |
|
|
|
|
Chet T16
Retroholic
Joined: 12 Feb 2004
Posts: 5685
|
| Posted:
Thu Mar 30, 2006 2:06 pm |
|
I have a working valver but no multimeter |
|
|
|
|
Rosso
Level 7 User
Joined: 22 Jan 2006
Posts: 182
|
| Posted:
Thu Mar 30, 2006 2:07 pm |
|
right i need a carrier pidgeon, some duct tape and your address.... |
|
|
|
|
Chet T16
Retroholic
Joined: 12 Feb 2004
Posts: 5685
|
| Posted:
Thu Mar 30, 2006 3:11 pm |
|
I'm also incompetent in all matters electrical |
|
|
|
|
Dan
Site Subscriber
Joined: 28 Jan 2005
Posts: 3547
|
| Posted:
Thu Mar 30, 2006 3:21 pm |
|
Setting up. These are general values, its taken from a red TPS which is found on espaces, 16V's and so on.
3 wires, green red and yellow.
The outer wires, red and green are really what concern you. But on the other hand your reference voltage will also affect these readings!
red - yellow 5.78kohms 4.65V
red - green 2.01kohms 0.28V
yellow - green 4.27kohms 4.96V |
|
|
|
|
Rosso
Level 7 User
Joined: 22 Jan 2006
Posts: 182
|
| Posted:
Thu Mar 30, 2006 3:40 pm |
|
So basically probe on the red wire, one on the yellow then adjust till i get 5.78kohms 4.65V then check the others? or have i read that completely wrong? |
|
|
|
|
Dan
Site Subscriber
Joined: 28 Jan 2005
Posts: 3547
|
| Posted:
Thu Mar 30, 2006 3:46 pm |
|
|
|
|
Rosso
Level 7 User
Joined: 22 Jan 2006
Posts: 182
|
| Posted:
Thu Mar 30, 2006 3:48 pm |
|
Happy days i can manage that! Cheers for your help Dan! |
|
|
|
|
|
|
