|
u need the correct spiggot rings (plastic hub rings),60.1 inner diameter, if ur changing wheels u can put between 35-40 and it will be fine most wheels now are comin 38 offset anyway.. i had 35 et wheels on ma ph1 and they sat out just nice to fill the arch and had loads of caliper clearance urs should be ok with the big brakes with a 35et i think if u go lower than 35 et it might catch ur arch. i have 7x18 et40 on jus now with 5mm spacer on back it just catches driver rear over heavy bumps but all the rest r fine.. without the spacer back wheels catch on inside rear only though, fronts r fine as is
Last edited by Skinny'sPh2; 19th June 2008 at 11:02 PM.
|