Breaking - Red P2 Chamade 19 16v - Retro-Renault

JB · 10th January 2007, 11:28 AM

Mah baby is gunna be broken. So anyone want anything lemme know.

Here she is currently.

Inside is green as it has sat for about 8 months.

Gearbox already taken. Everything else available.

Reasonable std exhaust system IIRC. inc. a good working CAT.

The wheels are not perfect. One is quite badly bent, it oscillates on a balancing machine visibly, so it is difficult to balance. All have kurb marks.

But everything must go or it will be scrapped. Its an MOT failure due to needed 2 complete new sills and 3 out of 4 inner arches have holes.

Engine is good. 130K bottom end, no knocking or smoking with a <20 mile reconditioned std head (mild porting), therefore new head gasket and oil seals from the rebuild. Runs well.

Best to drop me a PM.

Cheers,

JB

**Wicked Neo** · 10th January 2007, 12:33 PM

front hubs (as previously mentioned) and front brake calipers please, let me know how much you want for them and postage, cheers.

chappers · 10th January 2007, 02:32 PM

Has the cylnder head gone ? if not how much do you want for it ? And do you have the dash clocks fuel computer etc ?

JB · 15th January 2007, 01:24 PM

er it says a less than 20 mile old reconditioned cylinder head.

Personally I would rather not split the engine due to the new head with gasket thats running nice.

No trip computer on this one sorry.

RIBEIROCOSTA · 17th January 2007, 10:20 AM

Hello

I Would Like To Buy The Ecu
How Much Is Will Cost To U To Send To Portugal Thank You

JB · 18th January 2007, 10:03 AM

I shall find out for you. Failing that I know a friend who is in university here and is from Portugal, so maybe when he returns in holidays he could bring it with him!

10th January 2007, 11:28 AM	#1 (permalink)
JB Membre Join Date: Oct 2006 Location: Swansea, Sunny South Wales Posts: 456	Breaking - Red P2 Chamade 19 16v Mah baby is gunna be broken. So anyone want anything lemme know. Here she is currently. Inside is green as it has sat for about 8 months. Gearbox already taken. Everything else available. Reasonable std exhaust system IIRC. inc. a good working CAT. The wheels are not perfect. One is quite badly bent, it oscillates on a balancing machine visibly, so it is difficult to balance. All have kurb marks. But everything must go or it will be scrapped. Its an MOT failure due to needed 2 complete new sills and 3 out of 4 inner arches have holes. Engine is good. 130K bottom end, no knocking or smoking with a <20 mile reconditioned std head (mild porting), therefore new head gasket and oil seals from the rebuild. Runs well. Best to drop me a PM. Cheers, JB __________________ JB

10th January 2007, 02:32 PM	#3 (permalink)
chappers Membre de bébé Join Date: Nov 2006 Location: maldon essex Posts: 20	Has the cylnder head gone ? if not how much do you want for it ? And do you have the dash clocks fuel computer etc ? Last edited by chappers; 10th January 2007 at 02:35 PM.

15th January 2007, 01:24 PM	#4 (permalink)
JB Membre Join Date: Oct 2006 Location: Swansea, Sunny South Wales Posts: 456	er it says a less than 20 mile old reconditioned cylinder head. Personally I would rather not split the engine due to the new head with gasket thats running nice. No trip computer on this one sorry. __________________ JB

18th January 2007, 10:03 AM	#6 (permalink)
JB Membre Join Date: Oct 2006 Location: Swansea, Sunny South Wales Posts: 456	I shall find out for you. Failing that I know a friend who is in university here and is from Portugal, so maybe when he returns in holidays he could bring it with him! __________________ JB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

17th January 2007, 10:20 AM	#5 (permalink)
RIBEIROCOSTA Membre de bébé Join Date: Nov 2006 Location: PORTUGAL/AZORES Posts: 2	Hello I Would Like To Buy The Ecu How Much Is Will Cost To U To Send To Portugal Thank You