Professional DJ Mixer - Retro-Renault

**Wicked Neo** · 9th August 2008, 02:20 PM

Hi, For Sale, 1 x Stanton RM3-S Professional 3 channel DJ Mixer

I have had this mixer in my DJ setup for about 5 years now and only selling it as today I have upgraded to a 5 channel mixer with midi controller.

This mixer is in 'mint' condition meaning its clean, no scratches or marks on it, all the upfaders work with no noise, the crossfader works with no noise, all EQ knobs and selector switches work with no noise (no noise meaning audio hiss/electrical noise)
It has only been used in my home setup and it comes complete with power supply, original manual and original packaging!

You are quite welcome to look this item up on ebay, they average £20 plus postage for unboxed scruffier mixers, I am after £25 plus £10 postage for this clean well looked after professional mixer!

The Tech Specs:

3 channel DJ mixer 6 line, 3 phono, and 2 mic inputs 60mm channel faders Assignable AUX send/return Gain, 3 band EQ (+9/-26dB), and Pan control on each channel High quality professional crossfader with reverse function Microphone channel features volume controls and 3 band EQ (+12/-12 dB) Cue section features Pre Fader Listen function with volume control and Cue-Pan fader 3 band frequency isolators for channels 1 and 3 featuring three-way toggle switches with FLASH™ function Rec output User replaceable faders

Line inputs : 6 (RCA), 150 mV / 27K ohm
Phono inputs : 3 (RCA), 3 mV / 47K ohm
DJ mic input : 2 (XLR, 1/4"), 2.45 mV / 3K ohm
Effect Send : 1 (1/4"), 775mV
Effect Return : 1 (1/4"), 245mV
Master output : 1 (RCA), 775 mV / 1K ohm
Record output : 1 (RCA), 245 mV / 10K ohm
Headphone output : 1 (1/4"), 32 - 200 ohms recommended
Frequency Response : 20 Hz - 20 kHz, +/- 2 dB
Tone Control : + 9/-26 dB (Hi, Mid, Low)
Mic Tone : +/-12 dB (Hi, Mid, Low)
Gain Control : 0-20dB
S/N Ratio : less than 70dB
T.H.D. : less than 0.2%
Dimension : 14"(L) x 10 1/4"(W) x 4"(D)
356mm(L) x 260mm(W) x 102mm(D)
Weight : 8 lbs (3.6 Kg)

and this is my new mixer

Peter T · 9th August 2008, 05:17 PM

Hour's of fun for someone to play with all them knob's.

**psgold67** · 9th August 2008, 09:13 PM

might be interested for my KJ/PA, have to measure my case first to see if it fits and cant get to it at the moment, will PM you tomorrow if you still have it

kaos · 10th August 2008, 01:13 PM

intresting neo. i assume Master is the main port for the decks and then you have the extra line in's for more inputs? ( im used to a stand 2 chanel mixer with 2 decks and a switch to swap between another 2 inputs line1/line2 etc)

**Wicked Neo** · 10th August 2008, 01:20 PM

3 x phono inputs are for the decks (ch1, ch2, ch3) with 6 x line in for things like cd decks, pc, other audio devices.
The master is the master output, to a amplifier or a clubs main mixing board, REC is as it suggests, a recording output (i had this into the line in on my pc for recording mixes straight to hard disc) but can also be used to go to another amp for booth/monitor speakers etc.