clio tacho & aux dials

[bbracer16valver]

im doing a 16v dashtop, aux clock and dash..
is it all plug and play behind the dash for a 1.2 mk1 clio?
what will work what wont?
any extra wiring required?

whats the best quickest eaiest way of getting the clocks out??

[Chris H]

depends on the model and what they had beside the car.

if it has all the pins aT THE DOOR SHUT where the door loom plugs in your ok. If there no pins then its a base spec dash and you'll need another dash to ruin door speakers, plip locking etc etc

The dash display if its going into a decent dash then the tacho will work.

Temp gauge may not depending on engine loom.

None of the oil gauges will work.

[bbracer16valver]

its a 1.2 RN

i havent really paid much attention to the specs as of yet i will no more ina bit but i hope the shizzle is there is fecking freezing outside

[Chris H]

if its the poor spec effor tget another dash from an rt etc, get the leccy windows, c/l etc whilst your there

[bbracer16valver]

i got all the lecci window kit off winston

no C/L as yet

fook so a RT dash