19 phase 1 parts and advice needed..she will drive again!

[simonak]

hello all
so a few months back i crashed my car into the back of icecream eating old dear..i did €2600 of damage to her 08 fiesta and the extent of my renault can be seen below-as way worse!

so im very very keen to get this car back on the road one way or the other...so if any readers know of any breakers or people with a phase 1 in ireland that i can salvage a few odds and ends from it would be great..ive asked a few places around here (west of ireland) and most have no renaults at all

so what i need exactly is:
bonnet
front bumper
ok dont know the name of this part..its under bonnet...going from left to right, its bent as can be seen in photos and is now pushing into ratiator (unpunctured) and the head lights are also attached to it..either way its bent and needs replacing or straighening

http://i27.photobucket.com/albums/c1...s/_AK05263.jpg
http://i27.photobucket.com/albums/c1...s/_AK05266.jpg
http://i27.photobucket.com/albums/c1...s/_AK05268.jpg
http://i27.photobucket.com/albums/c1...s/_AK05269.jpg

so any help on locating or repairing these parts would be great..
cheers all
simon

[Graham]

Think I've headlights, indicators and the trim piece you bent.
I'm in Kildare though...

[The T.I.B.]

Tis but a scratch!

You'll want a new bonnet slam panel welding in. How come the strut brace is bent forwards?

Double check the chassis rails and the subframe aren't out of shape

[simonak]

Originally Posted by Graham

Think I've headlights, indicators and the trim piece you bent.
I'm in Kildare though...

what about a bonnet? by trim piece do you mean the bent bar/rail between lights and radiator?

my email is simonak@gmail.com
i can travel to kildare no worries if youve got the parts..send me an email and we can sort it out

nice one
simon

[simonak]

Originally Posted by The T.I.B.

Tis but a scratch!

You'll want a new bonnet slam panel welding in. How come the strut brace is bent forwards?

Double check the chassis rails and the subframe aren't out of shape

ill try get some more pics tomorrow if its dry...strut brace was like that already i think, seems strange that it happaned during the crash..but the carb casing is defo cracked so maybe it hit that..possible?
http://i27.photobucket.com/albums/c1...s/_AK05273.jpg

is the slam panel the badley bent/kinked bar running left to right between lights and rad?..if so ive noticed that other supports lower down are also a bit outta shape..can any of these be removed and straightened or is relpacing a better option altogether?
http://i27.photobucket.com/albums/c1...s/_AK05272.jpg