Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 16v F7P injectors
Author Message
mixpioneer
Site Subscriber

Joined: 29 Dec 2004
Posts: 395

Posted: Wed Jan 19, 2005 9:28 am

In one of my previous posts i mentioned about a strange hissing noise coming from between my inlet manifold and block.
After a poking around for a while i have discovered it's coming from one of the injectors where it enters the head and can be made better or worse by pushing on the injector from different angles.
Obviously (unless i'm much mistaken) this means one of the injector O-rings is knackered and needs replacing.
When removing the injector rail all four O-rings should be replaced so, easy enough, just phone renault and order the O-rings (should be very cheap).
Unfortunately, when i called renault they said they couldnt supply the O-rings on their own and i would have to buy the complete injectors at £120 each, that would be £480 + VAT just to replace four tiny rubber O-rings.

Not a chance!!

So, cut to the chase....... Anyone know where i could get the O-rings on their own? Or even any O-rings that would do the job?

Cheers!
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Jan 19, 2005 9:58 am

a fuel injection place will sell them to you, or a bosch agent.
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Wed Jan 19, 2005 10:52 am

lol the cheek of renAULT PRICES...
Chet T16
Retroholic

Joined: 12 Feb 2004
Posts: 5685

Posted: Wed Jan 19, 2005 6:32 pm

could you not just put silicone around them?
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Jan 20, 2005 5:41 am

no chet you can't!
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Jan 20, 2005 5:43 am

well if you mean slap some in witht he old seals still there then yes but it won't last.

i mean no if you remove the o-ring and just seal it with silicone.
mixpioneer
Site Subscriber

Joined: 29 Dec 2004
Posts: 395

Posted: Thu Jan 20, 2005 10:21 am

Would normal rubber o-rings work?
Or are they made from special high temperature rubber?
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Jan 20, 2005 2:22 pm

they are a lot thicker than you think.

I have yet to see a suitable o-ring in B&Q, find a bosch agent, about a fiver for 50 or something.
Chet T16
Retroholic

Joined: 12 Feb 2004
Posts: 5685

Posted: Thu Jan 20, 2005 5:07 pm

Chris H wrote:
well if you mean slap some in witht he old seals still there then yes but it won't last.

i mean no if you remove the o-ring and just seal it with silicone.


I mean just slap it on on top of the o-rings as they are new. If anyone ever gets some i'll buy a few, mine are held together with super glue Rolling Eyes
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Jan 21, 2005 5:31 am

am I the one whos gonna have to source them then?
stan
Gay Rights Activist

Joined: 07 Apr 2004
Posts: 1268

Posted: Sat Jan 22, 2005 8:21 am

i'll have some aswell Laughing
Chet T16
Retroholic

Joined: 12 Feb 2004
Posts: 5685

Posted: Sat Jan 22, 2005 12:02 pm

Chris H wrote:
am I the one whos gonna have to source them then?


Yeah Smile Good man!
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Mon Jan 24, 2005 4:59 am

il have some....canu chuck in some free injectors too? preferably on a rail, but thats optional
mixpioneer
Site Subscriber

Joined: 29 Dec 2004
Posts: 395

Posted: Mon Jan 24, 2005 5:25 am

I've found where to get the o-rings from, just need to know the exact model number of the bosch injectors used in the engine.

Any ideas?
Chet T16
Retroholic

Joined: 12 Feb 2004
Posts: 5685

Posted: Mon Jan 24, 2005 7:25 am

I have it o the work pc, i'll see if i can dig it out
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Mon Jan 24, 2005 7:45 am

I have them in the shed but chet will get em first I hope.

Not had time to look peeps but I will.
mixpioneer
Site Subscriber

Joined: 29 Dec 2004
Posts: 395

Posted: Tue Jan 25, 2005 4:36 pm

No luck with the injector model yet?

Not to worry, have ordered a few of spare injectors from cit-ren just to have a play with, will get the number off them when they arrive.

Does anyone know if the cold start injector under the manifold uses an o-ring aswell?

Cheers!
Chet T16
Retroholic

Joined: 12 Feb 2004
Posts: 5685

Posted: Tue Jan 25, 2005 7:03 pm

Sorry, i meant to post. Its the number for the injectors i have that i had (21 turbo ones)

IIRC the cold start one uses a gasket
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Jan 26, 2005 1:39 am

gasket for the cold start
mixpioneer
Site Subscriber

Joined: 29 Dec 2004
Posts: 395

Posted: Wed Feb 02, 2005 7:29 am

Have at last located some injector o-rings, has been a mad chase but got there in the end.

They are being sent over from Bosch in Germany and are the last 2 sets they have in stock. (should be getting more though)

Have ordered them from a place called John Roberts in Wrexham
Tel: 01978853882


These are the part numbers

The complete injector: 0 280 150 830

Top o-ring: 1280 210 752

Bottom o-ring: 1280 210 756


Anyway, look forward to stopping that nasty hissing and re-gain the power i've lost from the leak.


Last edited by mixpioneer on Tue Feb 08, 2005 3:33 pm; edited 1 time in total
Chet T16
Retroholic

Joined: 12 Feb 2004
Posts: 5685

Posted: Thu Feb 03, 2005 6:47 pm

Got the parts man in work to find a bosch agent and order the o-rings today. They said one of the numbers was invalid Confused The others are on the way tho so hopefully its the bottom ones
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours