Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Skimming after a blown HG
Author Message
Xvisor
Level 7 User

Joined: 06 Sep 2004
Posts: 230

Posted: Mon Mar 28, 2005 1:48 pm

Well i've got a question not actually me but its more on behalve of team1916v. In holland we have problem with most of the cars after having the head skimmed after a blown HG that within a few 100 miles the big end bearings die. Do you guys ever experience that or do you always (standard) replace them??


Last edited by Xvisor on Mon Mar 28, 2005 2:09 pm; edited 1 time in total
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Mon Mar 28, 2005 1:58 pm

ive never heard of that being a problem at all. How many cars has this happened to? could just be a coincidence?

I had mine skimmed by 0.012", about 0.3mm, which is quite a large skim and its done 10000 miles since that, no problems at all.
Xvisor
Level 7 User

Joined: 06 Sep 2004
Posts: 230

Posted: Mon Mar 28, 2005 2:06 pm

That's what we all thought in the beginning until quite a lot of them had the same problem.

some pics:
Image
Image
MicKPM
Affiliate

Joined: 28 Jan 2005
Posts: 360

Posted: Mon Mar 28, 2005 2:30 pm

FUCK ME FREDDY! That's not good is it? (Rhetorical question)

I've never heard of any car having any issues with bottom end bearings after suffering head gasket failures. Something like that tends to be caused by a mixture of neglect and serious abuse over the lifespan of the engine. How long were these vehicles driven around for before HGF was diagnosed? The top picture looks like the crank is showing signs of scoring which is never good. Could oil starvation be an issue here rather than component failure?

Mick
appytiser
Newbie

Joined: 28 Mar 2005
Posts: 19

Posted: Mon Mar 28, 2005 2:36 pm

Did you change the oil after head gasket replacement cos it only take a bit of water in the oil to knacker your engine ?
Xvisor
Level 7 User

Joined: 06 Sep 2004
Posts: 230

Posted: Mon Mar 28, 2005 2:45 pm

Well i'll be honest this was a track engine that has broke down because of the bearing gone and after 2 rounds of driving it after that it locked and it kicked the engine to pieces. but it's more or less to emphasise the point.
The actual question is should you take the extra care of changing the big end bearings when doing the HG or not?
MicKPM
Affiliate

Joined: 28 Jan 2005
Posts: 360

Posted: Mon Mar 28, 2005 3:00 pm

In that case, i'd say no need - the bottom end shouldn't be effected unless you continue to run it on the emulsified oil and give it death in every gear.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Tue Mar 29, 2005 1:09 am

no need to change any bearings unless theres clear wear.

No matter how much you skim the head it won't have any affect on the big ends.

Of course skimmingit so much the engineturns into a diesel is going to strain things.
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours